1. Engineering
  2. Mechanical Engineering
  3. do the calculations in details please please write readable...

Question: do the calculations in details please please write readable...

Question details

Experiment-2 Calculation of Energy Balance for Forced and Natural Convection in Concentric Tube Heat Exchanger Purpose of the experiment: Calculation of the heat transfer rate (q) for concentric tube heat exchanger for forced (pump is on) and natural convection (pump is off) Procedure 1) Open the main power 2) Turn on the heater and the pump. Choose counter flow from the panel. 3) Adjust the flow rate of water at 100 (liters/h) 4) Adjust the temperature to 60 (°C) 5) When the system becomes stable, record the temperatures and the flowrateon the table below 6) Stop the pump and open the by-pass valve 7) When the system becomes stable, record the temperatures and the flowrateon the table below Calculations: * Calculate the heat transfer rate for both forced (qforced) and natural convection (qnatural from the water side. (q = mwater C (AT)water) (The specific heat value (cp) of water should be taken at the average of water inlet and outlet temperatures) Draw the temperature vs. heat exchanger pipe length graphic for both forced and natural convection modes Calculate the log mean temperature difference (AT)im for both forced and natural convection modes p.water Data Sheet Forced convection Natural convection 60.0 58.0 13.8 Hot oil inlet temperature, ti (C) Hot oil outlet temperature, t2 (C) Cold water inlet temperature, t3 (C) Cold water outlet temperature, t4 (°C) Heater power, Pi (W) Volumetric flow rate of water Q liters/h) 60.1 58.6 17.0 13.6 773.6 100 26.0 743.2 100

Do the calculations in details please. Please write readable

Solution by an expert tutor
Blurred Solution
This question has been solved
Subscribe to see this solution