1. Engineering
  2. Mechanical Engineering
  3. in a large scale manufacturing plant a section of a...

Question: in a large scale manufacturing plant a section of a...

Question details

In a large scale manufacturing plant, a section of a steel pipe is supponed over a span of 7 m between two flanges and maybe simply supported by pins at each end. The pipe has an outside diameter of 300 mm and a wall thickness of 15 mm. Due to the operating conditions (including extermal environment conditions such temperature changes and also, supporting other structures, a concentrated load of magnitude 120 kN acts at the pipe section to the pipe axis, and a unifonmly distributed load of magnitude 10 kN/m acts along the span of the pipe. In addition, a concentrated load of 75 kN acts at the right hand cad perpendicular to the pipe axis and, an additional concentrated load of 50 kN also acts at the right hand end, inclinded at 45 to the pipe axis The pipe is also subjected axial force of 200 kN, and a force acting tangential to the pipe outside surface of magnitude 430 Draw the thrust, shear force and bending moment diagrams for the loaded pipe dae to the loading, and determine the magnitude and position ofthe moment. Highlight all other significant values. Determine the magnitude and the location of the maximum bending stress acting in the Calculate the maximum tensile and compressive stresses acting in the pipe and showen aneat sketch how they are distributed through the pipe cross-soction. Calculate the torsional shear stressacting in the pipe, and sketch the distribution trough the pipe cross-section. Detenmine also the angle of twist of the pipe in degrees. Determine the major and minor principal stresses and the maximum shear stress acting on the bottom surface of the pipe, and the angle on which the principal stress acts by an analytical and a graphical method. Calculate the maximum deflection of the pipe due to the lateral loading using simple superposition and Macauleys method, and comment on the values obtained. Datar Youngs modulus of Elasticity for steel 83 GN/m? Modulus of Rigidity for steel allowable deflection of shaft
Solution by an expert tutor
Blurred Solution
This question has been solved
Subscribe to see this solution