1. Engineering
  2. Electrical Engineering
  3. information laboratory session 7 preliminary questions phasors p flag question...

Question: information laboratory session 7 preliminary questions phasors p flag question...

Question details

Information Laboratory Session 7: Preliminary Questions Phasors P Flag question Aim To measure phasors in a simple RC circuit and to verify Kirchoffs Current Law in the phasor domain. Do your measurements and calculations using peak to peak voltages, as they are easier to measure. Note that magnitude is a peak to peak reading. . Measuring Phase angle To measure the phase angle between two voltages on the oscilloscope we need to first measure the time delay between the peaks Δt。f the two wave forms and the period Tas shown in Figure 1 From Figure 1 we can observe the following relation, φΔι 360 T which we can then use to solve for as follows. At ф 360 360Question 1 Not yet anewered Marked out of 4.00Internal P Flag questoImpedancea 502 Calculate the total impedance Z of the circuit in Figure 1, when the source frequency is 1kHz 3302 0V 1kHz P-P V2 0.47μ Figure 1 The Relevant part of the circuit is shown below 330Ω 0.47LF vi = 10V,-p 1kHz Use Ohms law in the complex domain to calculate the magnitude and phase of the current /with respect to V, assuming V,- 10.0p

Solution by an expert tutor
Blurred Solution
This question has been solved
Subscribe to see this solution