1. Engineering
  2. Mechanical Engineering
  3. mee 38100010002 please complete the assignment on a separate sheets...

Question: mee 38100010002 please complete the assignment on a separate sheets...

Question details

MEE 381-0001/0002 Please complete the assignment on a separate sheet(s) of paper ASSIGNMENT SHEET 02 DUE Tue, 5 FEB 2019 1) Sign-in to Google Classroom 2) Watch/review the Statics Review videos, located under Assignment 01 in Google Classroom. 3) A P-50 kN force acts on the structure as shown. The allowable tensile strength in the rod (1) is 200 MPA, and the allowable shear strength for the pins at A, B and C are 180 MPa. The pin at A is in single shear, while Pins B & C are in double shear. Determine the following: a. The minimum diameter of the rod (1) b. The minimum diameter of Pin A The minimum diameter of Pins B & C (they should be the same). c. d. The bearing stress in the bracket at A, if the bracket is 25-mm thick. Notes: In Design, typically size values round up to the next Preferred Size. Use Table A-17 to find the appropriate element sizes. Also, do not include any additional safety factor. The stresses above are allowed and already have a safety factor considered (we will discuss and consider safety factors soon). 5.3 m 7.5 m (D 60 8 m 3.4 m Table A-17 Fraction of Inches Preferred Sizes and Renard (R-Series) Numbers (When a choice can be made, use one of these sizes; however, not all parts or items are available in all the sizes shown in the table.) 12), 13, 13,14, 14!, 15, 15), 16, 16), 17, 17!, 18, 18, 19, 19).20 Decimal Inches 0010,0012,0016,0020,0025.0032.0040,005.006,0.08, 0.10, 0.12.0.16, 0.20,0.24, 0.30, 0.40,0.50, 0.60, 0.80, 1.00, 1.20, 1.40,1.60, 1.80,2.0, 24, 26,2.8,3.0, 3.2,34,3.6,3.8,4.0,4.2, 44,4.6,48,5.0,5.254, 5.6, 5.8,6.0,7.0,75,8.5,90,95, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5 13.0, 13.5, 14.0, 145, 15.0, 15.5, 16.0, 16.5, 17.0, 17.5, 18.0, 18.5, 19.0, 19.5, 20 Millimeters 005, 0.06, 008, 0.10,0.12, 0.16,0.20, 0.25, 0.30, 0.40, 0.50, 0.60, 0.70, 0.80, 0.90, 1.0, 1.1, 1.2 1.4, 1.5, 1.6, 1.8.2.0, 2.2, 2.5, 28, 3.0, 3.5,4.0,45, 5.0, 55, 6.0, 65,7.0, 8.0,9.0, 10, 11, 12. 14. 16. 18, 20, 22, 25, 28, 30, 32, 35, 40, 45, 50, 60, 80, 100, 120, 140, 160, 180, 200, 250, 300
Solution by an expert tutor
Blurred Solution
This question has been solved
Subscribe to see this solution