Question: product design has a part that is a 10 mm...
Product design has a part that is a 10 mm diameter cylinder, 100 mm long.
You must select a material for this part that will:
- Not experience plastic deformation under a static 20,000 N load
- Not elongate more than 0.15 mm under a static 20,000 N load
Materials you should consider are AISI 4130 steel, 5052-H36 Al alloy, and Ti-6Al-4V. Use Young’s modulus of 200 GPa, 70 GPa, and 119 GPa, respectively. Also, use a yield strength of 361MPa, 234 MPa, and 925 MPa, respectively.
Which material would you recommend using for the part? Why? Show your work