- Engineering
- Civil Engineering
- table 1 height information for the reservoirpipe system parameter symbol...
Question: table 1 height information for the reservoirpipe system parameter symbol...
Question details
Table 1: Height information for the reservoir-pipe system
|
Parameter |
Symbol |
Value |
Units |
|
Height of dam |
HDam |
11 |
m |
|
Height of water above middle of Pipe A |
H |
10 |
m |
|
Height to middle of Pipe A from the datum |
Z1 |
150 |
m |
|
Height to middle of Pipe B from the datum |
Z2 |
50 |
m |
|
Height to edge of Pipe C from the datum |
Z3 |
0 |
m |
Considering all the losses, show that head discharge relationship can be expressed by
where 
H is the water height in the Reservoir 1 above the centreline of the Pipe A, Z1 and Z2 are the reference heights from the datum to the centreline of the Pipe A and B (Figure 1), CAB is the discharge coefficient, xAB is the composite losses and VB is velocity in Pipe B.
Solution by an expert tutor
